Close menu
Films
Films (798 results) Show all
Carbon films Camouflage films Wood films Marble and granite films Metal effect films Animal fur films Animal skin films Licensed camo films Various films Activator for water transfer printing
Activator for water transfer printing (11 results) Show all
Activator A Activator B Activator ready for spraying
Accessory Films
Accessory Films (2 results) Show all
Carshapes
Machines Accessories Varnish
Accessories Varnish (12 results) Show all
Duct tape / Finelinetape Sandpaper and discs
Sandpaper and discs (6 results) Show all
Waterproof sandpaper Sanding blossom Soft pads
Sponges
Sponges (1 results) Show all
Polishing sponges
Various
Various (3 results) Show all
Mixing cup Stirring rods
0 Items in shopping basket

Your cart is currently empty.

Ergebnisse ()

Water Transfer Printing film YH-W004B | 60cm LIGHT TEAK

Log in and write a review
Article number: 20120899;0
from 5.95 /m
Delivery time: in 1-2 days
Price staggering
Order quantityPrice
From 1 LFM 5.95 * /LFM
From 100 LFM 5.60 * /LFM
From 500 LFM 5.15 * /LFM
Technical specifications

Width: 60 cm
Thickness: 40 µm
Material: PVA (Poly Vinyl Alkohol)
Soaking time: 180 Seconds
Color recommendations: RAL9010
 
Description

Water transfer print films consist of a transparent polyvinyl alcohol (PVA) layer, which is printed with a variety of decors. The ink layer is then sealed. The PVA layer dissolves on contact with water. After that, the seal is dissolved by an activator (a special type of solvent) and only the color layer remains. The ink layer adheres to the immersed workpiece and behaves as a lacquer layer after drying.

Quick start guide

The optimum water temperature for the processing of water print films is 32° Celsius. In cold weather up to 34° Celsius.
The water transfer print film should be cut on all sides at a distance of 1 cm to avoid coiling when placing on the water surface. Please do not stick with adhesive tape because the film cannot rise during the soaking process (If the PVA is dissolved, the film “relaxes” and the surface size increases minimally).
After the specified exposure time, spray the film at a distance of 20-30 cm in crossway direction with 25 to 45 g/m² activator (depending on the motif, since strongly printed films need more activator).
The workpiece can be immersed after approx. 15 seconds.
All components which are not made of ABS plastic must be primed before dipping (for example by lacquering).

After approx. one minute, the workpiece should be washed with 42° Celsius warm water (do not use a strong water jet, parts of the film could dissolve).

Note

The coloration shown may differ from the original film depending on the output device. In order to obtain a comparable result with the image, the background of the color recommendation should correspond to the selected water transfer print film.

Global

0,4 µ
60 cm
Profi-Line
Basic-Line

Customer reviews 0

0 Reviews
0 Reviews
0 Reviews
0 Reviews
0 Reviews