Close menu
Films
Films (761 results) Show all
Carbon films Camouflage films Wood films Marble and granite films Metal effect films Animal fur films Animal skin films Licensed camo films Various films Activator for water transfer printing
Activator for water transfer printing (11 results) Show all
Activator A Activator B Activator ready for spraying
Accessory Films
Accessory Films (10 results) Show all
Carshapes Pattern plates
Machines Paints
Paints (42 results) Show all
Basecoat for water transfer printing
Basecoat for water transfer printing (4 results) Show all
Liter containers Spray cans
One-Coat Basecoat
One-Coat Basecoat (6 results) Show all
Glossy Matt
Two-Coat Basecoat
Two-Coat Basecoat (9 results) Show all
Spray-Ready Undiluted
Clearcoat
Clearcoat (4 results) Show all
Liter containers Spray cans
Primer and Filler
Primer and Filler (8 results) Show all
Primer Filler Adhesion Promoter
Paint thinner Paint hardener Accessory paints
Accessories sets
sets (1 results) Show all
Car paint sets
Close shopping basket
0 Items in shopping basket

Your cart is currently empty.

Ergebnisse ()
Done

Water Transfer Printing film WTP-839 | 100cm MULTICAM ALPINE

Article number: 31000505;0
from 19.04 /m
Price staggering
Order quantityPrice
From 1 LFM 19.04 * /LFM
From 10 LFM 17.85 * /LFM
From 50 LFM 16.66 * /LFM
From 100 LFM 15.47 * /LFM
Technical specifications

Width: 100 cm
Thickness: 30 µm
Material: PVA (Poly Vinyl Alkohol)
Soaking time: 60 Seconds
Color recommendations: RAL9003
 
Description

Water transfer print films consist of a transparent polyvinyl alcohol (PVA) layer, which is printed with a variety of decors. The ink layer is then sealed. The PVA layer dissolves on contact with water. After that, the seal is dissolved by an activator (a special type of solvent) and only the color layer remains. The ink layer adheres to the immersed workpiece and behaves as a lacquer layer after drying.

Quick start guide

The optimum water temperature for the processing of water print films is 32° Celsius. In cold weather up to 34° Celsius.
The water transfer print film should be cut on all sides at a distance of 1 cm to avoid coiling when placing on the water surface. Please do not stick with adhesive tape because the film cannot rise during the soaking process (If the PVA is dissolved, the film “relaxes” and the surface size increases minimally).
After the specified exposure time, spray the film at a distance of 20-30 cm in crossway direction with 25 to 45 g/m² activator (depending on the motif, since strongly printed films need more activator).
The workpiece can be immersed after approx. 15 seconds.
All components which are not made of ABS plastic must be primed before dipping (for example by lacquering).

After approx. one minute, the workpiece should be washed with 42° Celsius warm water (do not use a strong water jet, parts of the film could dissolve).

Note

The coloration shown may differ from the original film depending on the output device. In order to obtain a comparable result with the image, the background of the color recommendation should correspond to the selected water transfer print film.

Customer reviews 0

0 Reviews
0 Reviews
0 Reviews
0 Reviews
0 Reviews